User Manual
Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 748 System Manual
4.8.28.5.6 Displaying Configuration Information for Ranging Timing Correction
Parameters
To display configuration for the Ranging Timing Correction parameters, run the
following command:
npu# show ranging-timingcorrection bs [<(1 to 16777215 StepSize 1)
Specify the BS ID if you want to display configuration for a particular BS. For
example, to display the Ranging Timing Correction parameters of BS 66053, run
the following command:
npu# show ranging-timingcorrection bs 66053
Do not specify this parameter if you want to view configuration information for all
existing BSs. To display information for all BSs, run the following command:
npu# show ranging-timingcorrection bs
Command
Modes
Global command mode
Command
Syntax
npu# show ranging-timingcorrection bs [<(1 to 16777215 StepSize 1)
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the Ranging Timing
Correction parameters of a
specific BS. Do not specify a
value for this parameter if you
want to display the Ranging
Timing Correction parameters
of all BSs.
Optional N/A 1-16777215