User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 745 System Manual
npu# show ranging-horng bs 66053
Do not specify this parameter if you want to view configuration information for all
existing BSs. To display information for all BSs, run the following command:
npu# show ranging-horng bs
4.8.28.5.4 Displaying Configuration Information for Initial Ranging Parameters
To display configuration for the Initial Ranging parameters, run the following
command:
Command
Syntax
npu# show ranging-horng bs [<(1 to 16777215 StepSize 1)
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the Handover
Ranging parameters of a
specific BS. Do not specify a
value for this parameter if you
want to display the Handover
Ranging parameters of all
BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
NumberofHandoverRangingCodes :<value>
InitialBackoffWindowSizeforHandoverRanging :<value>
FinalBackoffWindowSizeforHandoverRanging :<value>
Command
Modes
Global command mode