User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 730 System Manual
Command
Syntax
npu(config-bs-66053-ranging)# general [start-of-rng-codes <(0 to 255
StepSize 1)> ] [contbased-rsrvtimeout <(0 to 255 StepSize 1)> ]
[max-cellradius {one | two | four | eight | fifteen | twentyThree
| thirty} ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
start-of-rng-codes
<(0 to 255
StepSize 1)>
Start of Ranging Codes: The
starting number S of the
group of codes used for this
uplink
Note that the sum of initial
ranging codes, periodic
ranging codes, bandwidth
request codes, handover
ranging codes and start of
ranging codes should be
equal to or less than 256.
Optional 0 0 - 255
contbased-rsrvtime
out <(0 to 255
StepSize 1)>
Contention-Based
Reservation Timeout (in
frames). The number of
UL-MAPs to receive before
contention-based reservation
is attempted again for the
same connection.
Optional 5 0 - 255
max-cellradius
{one | two | four |
eight | fifteen |
twentyThree |
thirty}
The Maximum Cell Radius (in
km)
Optional two
 one
 two
 four
 eight
 fifteen
 twentyThree
 thirty