User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 721 System Manual
4.8.26 Managing BS Management Alarm Thresholds
Parameters
The Management Alarm Thresholds parameters enable configuring the alarm
thresholds for control messages traffic. If the retransmission rate or the drop rate
of control messages exceeds the applicable configurable threshold, an alarm will
be generated.
After enabling the BS configuration mode, you can execute the following tasks:
 Configure one or more of the Management Alarm Threshold parameters (refer
to Section 4.8.26.1).
 Restore the default values of some or all of the Management Alarm Threshold
parameters (refer to Section 4.8.26.2).
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display all Control Traffic QoS
Marking Rules parameters of
a specific BS. Do not specify
a value for this parameter if
you want to display all Control
Traffic QoS Marking Rules
parameters of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
IntraASNDSCP :<value>
IntraASN802.1pPriority :<value>
InternalManagementDSCP :<value>
InternalManagement802.1pPriority :<value>
Command
Modes
Global command mode