User Manual

4Motion - DN1031 23
4Motion Configuration Using AlvariSTAR 4Motion Configuration
Parameter Name Value – for Data Value – for Management
DL DSCP DSCP6
3.2.14 BS
1. In the navigation tree, right click on BS and click Create.
2. Define the following:
¾ BS LSB- This value should be unique in the network. For example,
1.2.3 (Driven from the value 01.02.03 (HEX) which is 66051 (DEC)
¾ Operator ID- populated with the last operator ID in the DB. Should
be the same for all BSs of a specific operator.
3. Click Apply to accept the changes.
3.2.14.1 BS Radio Configuration
3.2.14.1.1 Basic
Select BS > BS ID > Radio > Basic from the navigation tree.
3.2.14.1.1.1 General
Configure the parameters according to Table 11.
Figure 21: RC General
Table 11: RC General
Parameter Name Value
Name Slot2
Bandwidth 10 MHz