User Manual

4Motion Configuration Using AlvariSTAR 4Motion Configuration
NOTE
DSCP6 is relevant only when using CPE R2.
Figure 17: SFA - DSCP
Figure 18: SFA – DSCP6
Table 9: TOS Parameters
Classification Rule
Name
TOS Range TOS Mask
DSCP From 0 to 1 63
DSCP6 From 6 to 7 0
3.2.13 Service Profile
1. Select SFA > Service Profile from the navigation tree.
A Default service profile already exists. Use the default profile or create
a new profile.
IMPORTANT
A Default service profile is used only in the Unauthenticated mode. If this mode is not used,
you need to configure a new service profile according to configuration in AAA server.
2. Bind classifier rules with 1 flow according to Table 10.
4Motion - DN1031 20