User Manual

4Motion Configuration Using AlvariSTAR 4Motion Configuration
Figure 3: Management
Table 4: IP Interfaces
Parameter Name Value
IP Address External Management IP address should be
configure
Port Number 162 (default port number)
Community Public
Enable Site Traps Enable
3.2.5 AU
1. Select Equipment > Shelf > AU from the navigation tree.
2. Right-click on the AU icon and click Create.
3. AU number – select a slot number.
4. Follow Table 5 for the AU configuration.
5. Click on the Apply button to accept the changes.
A new AU will be added to the navigation tree according to the slot number
(e.g. AU Slot 1). This new screen allows the AU configuration.
4Motion - DN1031 9