User Manual

Chapter 4 - Operation and Administration Using the CLI Troubleshooting
4Motion 834 System Manual
4.11.2.3 Displaying Configuration Information for Source and
Destination Interfaces
To display configuration information for port monitoring, that is, the source and
destination interfaces for which this feature is enabled, run the following
command:
Syntax
Description
Parameter Description Presence Default
Value
Possible Values
[{source
interface
<interface-typ
e>
<interface-id>
|destination
interface
<interface-typ
e > <
interface-id
>}]
Indicates whether port
monitoring is to be
disabled for a source or
destination interface.
Specify the interface
type and interface ID
for the interface to be
configured.
Mandatory N/A Interface type:
 fastethernet
 gigabitetherne
Interface ID:
 0/1 (for Fast
Ethernet)
 0/2 (for Fast
Ethernet)
 0/3 (for Fast
Ethernet)
 0/4 (for Fast
Ethernet)
 0/5 (for Fast
Ethernet)
 0/6 (for Fast
Ethernet)
 0/7 (for Fast
Ethernet)
 0/8 (for Fast
Ethernet)
 0/9 (for Gigabit
Ethernet)
Command
Modes
Global configuration mode