User Manual

Chapter 4 - Operation and Administration Using the CLI Monitoring Performance of Hardware and Software
4Motion 812 System Manual
4.10.2.10.2 Resetting Statistics for the DHCP Proxy
Run the following command to reset statistics for the DHCP proxy:
npu# clear dhcp-proxy statistics
After you run this command, the statistics counter is reset to 0.
4.10.2.11 Managing Statistics for the DHCP Relay
This section describes the commands to be used for:
 “Displaying Statistics for the DHCP Relay” on page 812
 “Resetting Statistics for the DHCP Relay” on page 814
4.10.2.11.1 Displaying Statistics for the DHCP Relay
You can display statistics counters for the DHCP relay. The following table lists
the statistics counters for the DHCP relay:
NOTE
The privilege level of this command is 10.
Table 4-41: Statistics Counters for the DHCP Relay
Statistics Counter Indicates the number of...
dhcpDiscoverRx DHCP discover messages received by
the DHCP relay.
dhcpDiscoverDrop DHCP discover messages dropped by
the DHCP relay.
dhcpOfferRx DHCP offer messages received by the
DHCP relay.
dhcpOfferDrop DHCP offer messages dropped by the
DHCP relay.
dhcpRequestRx DHCP requests received by the DHCP
relay.
dhcpRequestDrop DHCP requests dropped by the DHCP
relay.
dhcpAckRx DHCP ACK messages received by the
DHCP relay.
dhcpAckDrop DHCP ACK messages dropped
received by the DHCP relay.