User Manual

Chapter 4 - Operation and Administration Using the CLI Monitoring Performance of Hardware and Software
4Motion 805 System Manual
Run the following command to display statistics for the MS state change
functionality.
npu# show msscfn statistics
After you run this command, the statistics for the MS state change functionality
are displayed.
msscfnMsSecCapMismatch MS network entry failures because of
unsupported security capability
mismatch.
Command
Syntax
npu# show msscfn statistics
Privilege
Level
1
Display
Format
MS State Change Function Statistics :
msscfnMsscReqTx = <value>
msscfnMsscReqRtx = <value>
msscfnMsscReqRx = <value>
msscfnMsscReqDrop = <value>
msscfnMsscRspTx = <value>
msscfnMsscRspRtx = <value>
msscfnMsscRspRx = <value>
msscfnMsscRspDrop = <value>
msscfnMsscRspAckTx = <value>
msscfnMsscRspAckRx = <value>
msscfnMsscRspAckDrop = <value>
msscfnMsUnsuppSecCap = <value>
msscfnMsSecCapMismatch = <value>
Command
Modes
Global command mode
Table 4-37: Statistics Counters for the MS State Change Functionality
Statistics Counter Indicates the number of...