User Manual

Chapter 4 - Operation and Administration Using the CLI Monitoring Performance of Hardware and Software
4Motion 788 System Manual
Run the following command to display statistics for the MIP-FA functionality:
npu# show mip-fa statistics
After you run this command, the statistics for the MIP-FA functionality are
displayed.
mipIpDeallocFailed IP address deallocation failures that
have occurred (for MSs for which the
NPU is serving as the MIP-FA).
mipInvalidEvent Invalid events that have occurred
because of receipt of messages by
MIP-FA (NPU).
Command
Syntax
npu# show mip-fa statistics
Privilege
Level
1
Display
Format
MIP-FA Statistics :
mipNumCmipMS = <value>
mipRRQRx = <value>
mipRRPRx = <value>
mipRRQTx = <value>
mipRRPTx = <value>
mipRRQErr = <value>
mipRRPErr = <value>
mipAgentAdvTx = <value>
mipAgentSolRx = <value>
mipMsLifetimeExp = <value>
= <value>
mipIpDeallocFailed = <value>
mipInvalidEvent = <value>
Table 4-32: Statistics Counters for the MIP-FA Functionality
Statistics Counter Indicates the number of...