User Manual

Chapter 4 - Operation and Administration Using the CLI Monitoring Performance of Hardware and Software
4Motion 786 System Manual
After you run this command, the statistics for the IGMP functionality are
displayed.
4.10.2.1.2 Resetting Statistics for the IGMP Functionality
Run the following command to reset statistics for the IGMP functionality:
npu# clear igmp statistics
After you run this command, the statistics counter is reset to 0.
4.10.2.2 Managing statistics for the MIP-FA functionality
This section describes the commands to be used for:
Command
Syntax
npu# show igmp statistics
Privilege
Level
1
Display
Format
IGMP Statistics:
igmpQueryRx = <value>
igmpReportRx = <value>
igmpReportTx = <value>
igmpErrQueryRx = <value>
igmpErrReportRx = <value>
igmpMcastGroups = <value>
igmpInvalidEvent = <value>
Command
Modes
Global command mode
NOTE
The privilege level of this command is 15.
IMPORTANT
The MIP-FA functionality is not supported in the current release.