User's Manual

Table Of Contents
SU Menu
BreezeMAX Modular Base Station System Manual 153
4.9.4.1 Show Files
Select this option to display the SU SW files currently stored in the NPU. For each
available SW file, the file name and the version number are displayed.
In addition, the Default SU SW File Name and Default Action for each Operation
Mode are also displayed.
4.9.4.2 Default SW File (Standard)
Select this option to define the Name of the SW File to be used for upgrading an
SU using Standard Operation Mode after network entry, and the Action to be
taken with this file. Not applicable to any SU served by an AU in which the SU SW
File (see Section 4.8.5.2.3.3) is other than None (null). They are also not applicable
to any Permanent SU whose Configured SW File Name (see Section 4.9.7.2.4.2) is
other than None (null).
The Default SW File (Standard) parameters are:
4.9.4.2.1 Name
The Name of the SW File to be used for upgrading an SU using Standard
Operation Mode after network entry. Should be one of the SU SW Files currently
stored in the NPU, or None (null).
4.9.4.2.2 Action
The operation to be performed with the Default SW File (Standard) after network
entry of an SU using Standard Operation Mode: None (do not load), Load (load to
Shadow), Run from Shadow or Set as Main. Refer to Section 4.9.7.2.4.2.2 for more
details on these Actions.
4.9.4.3 Default SW File (Advanced Si)
Select this option to define the Name of the SW File to be used for upgrading an
SU using Advanced Si Operation Mode after network entry, and the Action to be
taken with this file. Not applicable to any SU served by an AU in which the SU SW
File (see Section 4.8.5.2.3.3) is other than None (null). They are also not applicable
to any Permanent SU whose Configured SW File Name (see Section 4.9.7.2.4.2) is
other than None (null). The Default SW File (AD-Si) parameters are:
NOTE
The Default SW File (Standard) option is not applicable to this release that does not support
products operating in Standard Operation Mode.