User's Manual

Services Menu
BreezeMAX Modular Base Station System Manual 209
2 Define the Priority Classifiers that should be available for the required Service
Profiles. All QoS Profiles required for the Uplink/Downlink QoS profiles list
must be defined in advance.
3 Define the Forwarding Rules that should be available for the required Service
Profiles. The QoS Profiles required for the Multicast QoS Profile parameter
must be defined in advance.
4 Define the Service Profile. All required Priority Classifiers and Forwarding
Rules must be defined in advance.
5 Once there are various QoS Profiles, Priority Classifiers and Forwarding Rules
in the database, you can skip one or more of the steps 1 to 6.
4.10.6 Defining Local Services
1 Verify that the necessary Service Profile(s) are available in the database.
2 Define the relevant Subscriber.
3 Verify that the applicable SU is defined.
4 Use existing Subscriber Name, SU MAC Address and Service Profile Name to
define the required Service.
Once there are various Subscribers and SUs in the database, you can skip one or
more of the steps 2 to 3.
4.10.7 Defining RADIUS Based Services
1 Verify that the necessary Service Profiles are available in the database of the
relevant Base Station(s).
2 The format of the each Service in the ID Filter in the RADIUS Authentication
server(s) is n:v:h:a:c; The ID Filter may include up to 5 Services, separated by
“;”: s1;s2;...
 n = Service Profile Name
 v=<VLAN List>. v=<> is an empty VLAN list.
 h=ON or OFF, indicating the configured Hybrid VLAN Mode.
 a=<OFF or ON, VLAN ID>, indicating the configured Access VLAN Mode,
and the Access VLAN ID for Access VLAN ON.
To define a new Service "from scratch":