User's Manual

Table Of Contents
148 Operation
Chapter 4 - Operation and Administration
The range is from 0 to 300 Voice Calls.
The default is 50.
4.8.6 Performance Monitoring
The AU Performance menu includes the following options:
Ports Counters
Burst Error Rate Counters
4.8.6.1 Ports Counters
The Ports Counters option enables viewing or resetting the Back-Panel and
Wireless ports counters. The information displayed for each counter is the
accumulated number since the last time the counters were reset. The counters
are reset each time the AU is reset, or upon activating the Reset option.
The counters describe the traffic at the Back-Panel and Wireless ports, as follows:
Back-Panel Port Counters
Data Bytes Received: The total number of data bytes received from the
Back-panel (NPU). Management frames and frames with errors are not
included.
Data Bytes Discarded on Rx: The number of bytes in packets discarded
due to communication errors between the AU and the NPU.
Data Bytes Transmitted: The total number of data bytes transmitted to the
Back-Panel (NPU). Management frames and frames with errors are not
included.
Data Bytes Discarded on Tx: This count is always 0 (No discards).
Wireless Port Counters
Data Bytes Received: The total number of data bytes received from the
Wireless link. MAC management frames and frames with errors are not
included.
NOTE
The Back-Panel port of the AU is the internal Ethernet port between the AU and the NPU.