User's Manual

ManualsBrandsAlvarion Technologies ManualsElectronicsBreezeMAX 4Motion Broadband Wireless Access System

Chapter 3 - Operation and Administration Using the CLI Managing ODUs

4Motion 433 System Manual

3.6.1.3 Restoring Default Values for ODU Configuration Parameters

After enabling the ODU parameters configuration mode you can restore the

default values for the external-cavity-filter-existence parameter.

To restore the general external-cavity-filter-existence parameter to the default

value, run the following command:

npu(config-odu-params-1)# no odu-general

[external-cavity-filter-existence]

The parameter will be restored to its default value, while the other parameters will

remain unchanged.

Privilege

Level

Syntax

Description

Parameter Description Presence Default

Value

Possible Values

[external-cavity-filte

r-existence {TRUE

| FALSE}]

Informational parameter

indicating whether an

external cavity filter for the

ODU exists.

Optional FALSE

 TRUE

 FALSE

[required-odu-type

{...} ]

The required ODU type.

For more details refer to

Section 3.6.1.1

Optional The

previously

configured

valuw

For details refer to

Section 3.6.1.1

Command

Modes

odu-params configuration mode

NOTE

Refer to Section 3.6.1.2 for a description and default value of this parameter.