User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 397 System Manual
3.3.15.3.2 Displaying Configuration Information for Power Feeders
To display configuration information for all defined Power Feeders, run the
following command:
npu# show power-feeder configuration
pfPortNo
<pfport no
(1-4)>
Each combination
of Power Feeder
Unit Number and
Port Number can
appear in a
maximum of one
Power Feeder
instance
The Power Feeder port
number
Mandatory N/A 1-4
AuSlotNo
<AuslotNo
(-1,1-4,7-9)>
The AU Slot number.
-1 means none.
Optional -1 (none) -1 (none), 1-4,
7-9
AuPortNo
<AuPortNo
(-1,1-4)>
Each combination
of AU Slot Number
and Port Number
can appear in a
maximum of one
Power Feeder
instance (excluding
combinations with
a none value).
The AU Port number.
-1 means none.
Optional -1 (none) -1 (none), 1-4
Command
Modes
Global configuration mode
Command
Syntax
npu# show power-feeder configuration
Privilege
Level
1