User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 639 System Manual
3.8.29.2 Restoring the Default Values of Scheduler Parametes
To restore the default values of some or all of the Scheduler parameters, run the
following command:
npu(config-bs-66053)# no scheduler [scheduler-mode ]
[dl-abuse-protection-level ] [ul-abuse-protection-level ]
You can restore only some parameters to the default values by specifying only
those parameter. For example, to restore only the ul-abuse-protection-level
parameter to the default value, run the following command:
npu(config-bs-66053)# no scheduler ul-abuse-protection-level
This parameter will be restored to its default value, while the other parameters
will remain unchanged.
To restore all parameters to their default value, run the following command:
npu(config-bs-66053)# no scheduler
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
scheduler-mode
{equalRate |
equalTime} ]
The scheduling scheme
for uncommitted data.
Optional equalRate
equalRate
equalTime
dl-abuse-prote
ction-level
{none | low |
medium}
The protection level for
the downlink for
equalRate scheduling
mode.
Optional none
none
low
medium
ul-abuse-prote
ction-level
{none | low |
medium}
The protection level for
the uplink for equalRate
scheduling mode.
Optional none
none
low
medium
Command
Modes
bs configuration mode