User's Manual
Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 588 System Manual
Command
Syntax
npu(config-bs-66053)# bearer [ip-address <ip address> ]
[ip-subnetmask <ip address> ] [dflt-gw <ip address> ] [mtu-size
<(1500 to 9000 StepSize 1)> ] [linkusage-hardthrshld <(1 to 100
StepSize 1)> ] [bearer-vlan <(9 to 9 StepSize 1) | (11 to 100
StepSize 1) |(110 to 4094 StepSize 1)> ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Defaul
t Value
Possible
Values
[ip-address <ip address>
]
The IP address of the
bearer interface of the
BS. Must be unique in
the nework. All BS
bearer interfaces of the
unit should be in the
same subnet, together
with the NPU’s bearer
interface (if applicable).
Mandatory
when creating a
new BSl
N/A IP address
[ip-subnetmask <ip
address> ]
The IP subnet mask of
the bearer interface of
the BS
Mandatory
when creating a
new BSl
N/A Subnet mask
[dflt-gw <ip address> ] The IP address of the
default gateway of the
bearer interface of the
BS. Must be in the
same subnet with the
BS bearer ip interface.
Mandatory
when creating a
new BSl
N/A IP address
[mtu-size <(1500 to 9000
StepSize 1)> ]
MTU size (in bytes) of
the bearer interface of
the BS
Optional 1500 1500 - 9000
[linkusage-hardthrshld
<(1 to 100 StepSize 1)> ]
The BS backplane
usage hard limit
threshold, in
percecents. An alarm if
sent if either uplink or
downlink backplane
link usage exceeds the
threshold.
Optional 80 1 - 100