User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 584 System Manual
npu# show airframe-dynamicperm bs [<(1 to 16777215 StepSize 1)>]
Specify the BS ID if you want to display configuration for a particular BS. For
example, to display the Airframe Dynamic Permutation parameters of BS 66503,
run the following command:
npu# show airframe-dynamicperm bs 66053
Do not specify the BS ID if you want to view configuration information for all
existing BSs. To display information for all BSs, run the following command:
npu# show airframe-dynamicperm bs
Command
Syntax
npu# show airframe-dynamicperm bs [<(1 to 16777215 StepSize 1)> ]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the Airframe Dynamic
Permutation parameters of a
specific BS. Do not specify a
value for this parameter if you
want to display the Airframe
Dynamic Permutation
parameters of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing
Neighbour
BS in each
of the
existing BSs
if requested
for all)
BSIDLSB :<value>
DownlinkPermutationBase :<value>
UplinkPermutationBase :<value>