User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 557 System Manual
3.8.16 Managing Airframe Structure Parameters
1 Enable the Airframe configuration mode (refer to Section 3.8.16.1)
2 You can now execute any of the following tasks:
» Configure one or more of the Airframe parameters tables (refer to
Section 3.8.16.2)
» Restore the default values of parameters in one or more of the Airframe
parameters tables (refer to Section 3.8.16.3)
» Terminate the Airframe configuration mode (refer to Section 3.8.16.4)
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the Baseband
bandwidth parameter of a
specific BS. Do not specify a
value for this parameter if you
want to display the Baseband
bandwidth parameter of all
BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
Bandwidth :<value>
Command
Modes
Global command mode
To configure Airframe Structure parameters: