User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 551 System Manual
npu# show nbr-all bs [<(1 to 16777215 StepSize 1)> bs-id-lsb <(1 to 16777215
StepSize 1)>]
Specify the BS ID and the Neighbour BS ID (bs-id-lsb) if you want to display
configuration for a particular Neighbour BS in a particular BS. For example, to
display all parameters of Neighbour BS 68000 in BS 66503, run the following
command:
npu# show nbr-all bs 66053 bs-id-lsb 68000
Do not specify these parameters if you want to view configuration information for
all existing Neighbour BSs in all existing BSs. To display information for all
Neighbour BSs in all BSs, run the following command:
npu# show nbr-all bs
Command
Syntax
npu# show nbr-all bs [<(1 to 16777215 StepSize 1)> bs-id-lsb <(1 to 16777215 StepSize 1)> ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the Trigger Setup
parameters of a specific
Neighbour BS in a specific
BS. Do not specify a value for
this parameter if you want to
display the Trigger Setup
parameters of all Neighbour
BSs in all BSs.
Optional N/A 1-16777215