User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 529 System Manual
[dcd-configchangec
ount <(0 to 255
StepSize 1)> ]
DCD configuration
change count of
neighbor BS
In the current release
must be set to 0.
Mandatory
When
creating a
new
Neighbour
BS.
N/A 0 - 255
must be set to 0
eirx-pir-max <(-140
to -40 StepSize 1)>
The required effective
isotropic received
power at the Neighbor
BS for Initial ranging, in
dBm.
Should be taken from
Power Control
maxeirxp (see
Section 3.8.6.5.2)
Optional -124 -140 to -40
[frequency
<(2022.5 to 2217.5
StepSize 0.125) |
(2302.5 to 2397.5
StepSize 0.125) |
(2487.5 to 2687.5
StepSize 0.125) |
(3302.5 to 3397.5
StepSize 0.125) |
(3402.5 to 3597.5
StepSize 0.125) |
(3602.5 to 3797.5
StepSize 0.125)> ]
Downlink center
frequency of neighbor
BS.
Should be taken from
RF frequency
parameter of the
relevant BS (see
Section 3.8.14.2)
Mandatory
When
creating a
new
Neighbour
BS.
N/A
 2022.5 to 2217.5
in steps of 0.125
 2302.5 to 2397.5
in steps of 0.125
 2487.5 to 2687.5
in steps of 0.125
 3302.5 to 3397.5
in steps of 0.125
 3402.5 to 3597.5
in steps of 0.125
 3602.5 to 3797.5
in steps of 0.125