User's Manual
Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 517 System Manual
3.8.11 Managing Scan Negotiation Parameters
After enabling the BS configuration mode, you can execute the following tasks:
Configure one or more of the Scan Negotiation parameters (refer to
Section 3.8.11.1).
Restore the default values of some or all of the Scan Negotiation parameters
(refer to Section 3.8.11.2).
Command
Syntax
npu# show triggersetup bs [<(1 to 16777215 StepSize 1)
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display Trigger Setup
parameters of a specific BS.
Do not specify a value for this
parameter if you want to
display Trigger Setup
parameters of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
AverageDurationofDefaultRSSI(msec) :<value>
AverageDurationofDefaultCINR(msec) :<value>
AverageDurationofDefaultRTD(msec) :<value>
Command
Modes
Global command mode