User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 515 System Manual
3.8.10.1 Configuring Trigger Setup Parameters
From the BS configuration mode, run the following command:
npu(config-bs-66053)# triggersetup [avgduration-rssi <(0 to 255 StepSize 1)>]
[avgduration-cinr <(0 to 255 StepSize 1)>] [avgduration-rtd <(0 to 255 StepSize
1)>]
3.8.10.2 Restoring the Default Values of Trigger Setup Parameters
To restore one or all of the Trigger Setup parameters to their default values, run
the following command:
npu(config-bs-66053)# no triggersetup [avgduration-rssi] [avgduration-cinr]
[avgduration-rtd]
To configure the Trigger Setup Parameters:
Command
Syntax
npu(config-bs-66053)# triggersetup [avgduration-rssi <(0 to 255
StepSize 1)> ] [avgduration-cinr <(0 to 255 StepSize 1)> ]
[avgduration-rtd <(0 to 255 StepSize 1)> ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[avgduration-rssi <(0
to 255 StepSize 1)> ]
The default RSSI average
duration for triggers, in
milliseconds
Optional 50 0 - 255
[avgduration-cinr <(0
to 255 StepSize 1)> ]
The default CINR average
duration for triggers, in
milliseconds
Optional 50 0 - 255
[avgduration-rtd <(0 to
255 StepSize 1)> ]
The default RTD average
duration for triggers, in
milliseconds
Optional 50 0 - 255
Command
Modes
bs configuration mode