User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 514 System Manual
3.8.10 Managing Trigger Setup Parameters
After enabling the BS configuration mode, you can execute the following tasks:
 Configure one or more of the Trigger Setup parameters (refer to
Section 3.8.10.1).
 Restore the default values of one or all of the Trigger Setup parameters (refer to
Section 3.8.10.2).
You can display configuration information for the Trigger Setup parameters of a
selected or all existing BSs (refer to Section 3.8.10.3).
TrigName
{scnReqCinrMin |
scnReqRssiMin |
scnReqRtdMax |
hoReqCinrMaxNbs |
hoReqRssiMaxNbs |
hoReqCinrMargin |
hoReqRssiMargin |
hoReqRtdMax |
hoReqCinrMinSbs |
hoReqRssiMinSbs} ]
The Trigger name
Specify only if you
want to display a
specific Trigger of a
specific BS. Do not
specify if you want to
display all Triggers
parameters of all BSs
 scnReqCinrMin
 scnReqRssiMin
 scnReqRtdMax
 hoReqCinrMaxNbs
 hoReqRssiMaxNbs
 hoReqCinrMargin
 hoReqRssiMargin
 hoReqRtdMax
 hoReqCinrMinSbs
 hoReqRssiMinSbs}
Display
Format
(for a
selected
Trigger)
BSIDLSB :<value>
scnReqRssiMin :<value>
Command
Modes
Global command mode