Manualshelf

User's Manual

ManualsBrandsAlvarion Technologies ManualsElectronicsBreezeMAX 4Motion Broadband Wireless Access System
141142143144145146147148149150
Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 508 System Manual
3.8.8 Managing Neighbor Advertisement
Parameters
After enabling the BS configuration mode, you can execute the following tasks:
Configure one or more of the Neighbor Advertisement parameters (refer to
Section 3.8.8.1).
Restore the default values of one or all of the Neighbor Advertisement
parameters (refer to Section 3.8.8.2).
You can display configuration information for the Neighbor Advertisement
parameters of a selected or all existing BSs (refer to Section 3.8.8.3).
3.8.8.1 Configuring Neighbor Advertisement Parameters
From the BS configuration mode, run the following command:
npu(config-bs-66053)# nbradvertise [triggersetup <(0 to 100 StepSize 0.1)>]
To configure the Neighbor Advertisement Parameters:
Command
Syntax
npu(config-bs-66053)# nbradvertise [triggersetup <(0 to 100
StepSize 0.1)> ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[triggersetup <(0 to 100
StepSize 0.1)> ]
The periodic NBRADV
transmission interval, in
seconds
Optional 10 0 - 100 in
steps of 0.1
Command
Modes
bs configuration mode