Manualshelf

User's Manual

ManualsBrandsAlvarion Technologies ManualsElectronicsBreezeMAX 4Motion Broadband Wireless Access System
141142143144145146147148149150
Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 504 System Manual
3.8.7 Managing BS Feedback Allocation
Parameters
After enabling the BS configuration mode, you can execute the following tasks:
Configure one or more of the Feedback Allocation parameters (refer to
Section 3.8.7.1).
Restore the default values of one or all of the Feedback Allocation parameters
(refer to Section 3.8.7.2).
You can display configuration information for the Feedback Allocation parameters
of a selected or all existing BSs (refer to Section 3.8.7.3).
3.8.7.1 Configuring Feedback Allocation Parameters
From the BS configuration mode, run the following command:
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display all Power Control
parameters of a specific BS.
Do not specify a value for this
parameter if you want to
display all Power Control
parameters of all BSs.
Optional N/A 1-16777215
Command
Modes
Global command mode
To configure the Feedback Allocation Parameters: