User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 483 System Manual
3.8.5.5 Deleting a Service Mapping Rule
Run the following command from the BS configuration mode to delete a Service
Mapping Rule:
npu(config-bs 66053)# no srvcmaprule <(1 to 255 StepSize 1)>
3.8.5.6 Displaying Configuration Information for Service Mapping
Rules
You can display the current configuration information for the following
parameters tables:
 General (refer to Section 3.8.5.6.1)
 Order (refer to Section 3.8.5.6.2)
 R1 Profile (refer to Section 3.8.5.6.3)
 R6 Profile (refer to Section 3.8.5.6.4)
 All (refer to Section 3.8.5.6.5)
Command
Syntax
npu(config-bs 66053)# no srvcmaprule <(1 to 255 StepSize 1)>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 255
StepSize 1)>
The Service Mapping Rule
index
Mandatory N/A 1-255
Command
Modes
bs configuration mode