User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 476 System Manual
3.8.5.2.3 Configuring R1 Profile Parameters
To configure mapping rules to R1 Profile parameters, run the following command:
npu(config-bs-66053-srvcmaprule-1)# r1prof [modify-serviceqos
{TRUE | FALSE} ] [dfltpriority <(0 to 7 StepSize 1)> ]
[datadeliverytype {uGS | rTVR | nRTVR | bE | eRTVR} ] [priority <(0
to 7 StepSize 1)> ] [mir <(0 to 40000 StepSize 1)> ] [cir <(0 to
40000 StepSize 1)> ] [jitter <(0 to 5000 StepSize 1)> ] [latency
<(0 to 5000 StepSize 1)> ] [grant-interval <(0 to 5000 StepSize 1)>
]
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[look-up-order <(1 to
255 StepSize 1)> ]
Defines the order in which the
conceptual rows of the table are
checked to find a match.
Note: The value of this
parameter must be different for
each conceptual row instance
Mandatory 1 to 255
Command
Modes
bs service mapping rule configuration mode
IMPORTANT
When creating a new Service Mapping Rule, all mandatory parameters must be configured.
Command
Syntax
npu(config-bs-66053-srvcmaprule-1)# r1prof [modify-serviceqos
{TRUE | FALSE} ] [dfltpriority <(0 to 7 StepSize 1)> ]
[datadeliverytype {uGS | rTVR | nRTVR | bE | eRTVR} ] [priority
<(0 to 7 StepSize 1)> ] [mir <(0 to 40000 StepSize 1)> ] [cir <(0
to 40000 StepSize 1)> ] [jitter <(0 to 5000 StepSize 1)> ]
[latency <(0 to 5000 StepSize 1)> ] [grant-interval <(0 to 5000
StepSize 1)> ]
Privilege
Level
10