User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration

4Motion 368 System Manual

3.3.13.3 Displaying the Status of Performance Data Collection

To display whether collection and storage of performance data is enabled/disabled

for a group, run the following command:

To display the status for an NPU counters group:

npu# show npu pm-group status {BckhlPort | MgmtPort | CascPort |

RelayDhcp | ServerDhcp | MsStateChangeFn}

To display the status for an AU counters group:

npu# show au pm-group status { BsDeRegistrationTable | BsIntegrity

| BsMobilityTable | BsNetworkEntryTable | BsTrafficTable |

BsUtilizationTable | BsIdleModeTable |

BsFastFeedbackCQIHandlingTable | BsAckNackChannelHandlingTable |

BsEndTransactionUpdateTable | BsDlDataZoneFrameHistogramsTable |

BsTxR1NetTrafficTable | BsRxR1NetTrafficTable |

BsTxR1TotalTrafficTable | BsRxR1TotalTrafficTable |

BsDLHARQSbDropsTable | BsDLHARQTransmissionTable | BsGeneral |

Bsallmsbasicmode | Bsspecificmsadvancedmode}

IMPORTANT

An error may occur if run this command when you are operating the NPU in the Transparent mode

and want to display performance data collection for the following WiMAX signaling protocol groups:

 Service Flow Authorization functionality

 Data path functionality

 AAA client functionality

 Authenticator function

 Context function

 DHCP proxy functionality

 DHCP relay functionality

 DHCP server functionality

 MS state change functionality