User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 121 System Manual
3.3.2.3.2 Shutting down/Enabling an IP Interface
To shut-down an IP interface, run the following command:
npu(config-if)# shutdown
Run the following command to enable the interface:
npu(config-if)# no shutdown
3.3.2.3.3 Assigning an IP address to an interface
Run the following command to assign an IP address and subnet mask for an IP
interface:
npu(config-if)# ip address <ip-address> <subnet-mask>
Syntax
Description
Parameter Description Presence Default
Value
Possible Values
internal-mgmt
|external-mgmt
| bearer |
local-mgmt
Indicates the IP interface
for which the configuration
mode is to be enabled.
Mandatory N/A
 internal-mgmt
 external-mgmt
 bearer
 local-mgmt
Command
Modes
Global configuration mode
Command
Syntax
npu(config-if)# shutdown
npu(config-if)# no shutdown
Privilege
Level
10
Command
Modes
Interface configuration mode