User's Manual

Document History
4Motion xvi System Manual
Configuring the Trap Manager
Section 3.3.14.2
Added note: A route to forward traps to a
configured Trap Manager IP address must
exist.
June 2009
Displaying the Trap Rate Limit
Section 3.3.14.2.5
Updated description. June 2009
Configuring the Date and Time
Section 3.3.15.2.3
Corrected the presence of UTC to Optional. June 2009
Configuring Power Feeders
Section 3.3.15.3.1
Added note on error condition. June 2009
Displaying the Unique Identifier for
the 4Motion Shelf
Section 3.3.15.8.2
Corrected command’s syntax. June 2009
Displaying the Vendor Identifier
Section 3.3.15.9
Updated description. June 2009
Displaying Location Information for
the 4Motion Shelf
This section (previously Section 4.10.1.4) was
removed (described in
Section 3.3.15.7.2).
June 2009
Displaying the Unique Identifier for
the 4Motion Shelf
This section (previously Section 4.10.1.5) was
removed (described in
Section 3.3.15.8.2).
June 2009
Enabling the Port Monitoring Session
Section 3.11.2.1
Updated command’s syntax. June 2009
Disabling a Port Monitoring Session
Section 3.11.2.1
Updated command’s syntax.
Updated description
June 2009
Upgrading the NPU: Step 2:
Triggering Software Download
Section B.2.1.2
Added error condition (available memory). June 2009
Upgrading the AU Step 3: Creating
the AU-to-Image Mapping
Section B.3.1.3
Removed error condition (regarding mapping
the AU to an image that is not residing in the
AU flash).
June 2009
Displaying the Card Types Installed in
Shelf Slots 1 - 9
Section 3.10.1.1
New June 2009
ODU Names
Table 1-7,
ODU-2340-2400-000N-36-1X1-N changed to
ODU-HP-2.3b
June 2009
Configuring Bearer Plane QoS
Marking Rules
Section 3.3.11.11
Updated description of the feature. June 2009
Topic Description Date Issued