User's Manual

Chapter 2 - Commissioning Completing the Site Configuration Using AlvariSTAR
4Motion 64 System Manual
2 Click Apply for the device to accept the configuration.
3 You will be prompted to properly configure some additional parameters.
4 Click Apply for the device to accept the configuration.
5 Select the Radio Advanced screen and click Apply to complete the
configuration.
2.2.6.3 Connectivity
2.2.6.3.1 Basic Screen - Bearer Tab
1 Configure the following mandatory parameters:
» IP Address
» IP Subnet Mask
» Default Gateway
2 Click Apply for the device to accept the configuration.
2.2.6.3.2 Basic Screen - Authentication Tab
1 Configure the mandatory Default Authenticator IP Address parameter.
2 Click Apply for the device to accept the configuration.
2.2.7 Site Sector Configuration
1 Right click on the Site Sector level entry in the Navigation Pane. The New Site
Sector definition window will open.
2 In the New Site Sector definition window, define the Site Sector Number
3 Click Apply.
To create a new Site Sector entity: