User's Manual

Chapter 2 - Commissioning Completing the Site Configuration Using AlvariSTAR
4Motion 62 System Manual
2 Click Apply for the device to accept the configuration.
2.2.5.2.2 Service Groups Tab
At least one Service Group associated with a defined Service Interface for data
must be defined. If a dedicated management station for CPEs is being used, a
suitable Service Group associated with the defined Service Interface for
management must also be defined.
1 Click on the Add Service Group button and configure at least the following
mandatory parameters:
» Name
» Type
» Service Interface Name
» DHCP Function Mode
» DHCP Own IP Address
» External DHCP Server IP Address (Relay mode)
» IP Address Pool From (Server mode)
» IP Address Pool To (Server mode)
» Subnet Mask (Server mode)
» DNS Server IP Address (Proxy mode)
2 Click Apply for the device to accept the configuration.
2.2.5.3 SFA Screen -Classification Rules Tab
Create the necessary Classification Rule(s) according to the relevant type of traffic,
and click Apply.
2.2.5.4 Service Profiles
At least one Service Profile must be defined and associated with an already
defined Service Group.
1 Right-click on the Service Profile node and select Create. The New Service
Profile window is displayed.
2 Define the Name of the New Service Profile and click Apply.