User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 244 System Manual
size(1020-2000)>][RadiusAtrbtTypeServiceProfileName
<AtrbtTypeId(1-255)>] [alrmAaaSwitchoverRetryFailThrshld(1-250)>]>
NOTE
You can display configuration information for global RADIUS parameters. For details, refer to
Section 3.3.11.13.2.3
IMPORTANT
An error may occur if you provide an invalid value for any of these parameters. Refer the syntax
description for more information about the appropriate values and format for configuring these
parameters.
Command
Syntax
npu(config)# radius <[accessreq-retries <retransmissions>]
[accessreq-interval <timeout>] [nasid <nas-identifier>] [timezone-offset
<time-offset(0-86400)>] [mtu <framed mtu size(1020-2000)>]
[RadiusAtrbtTypeServiceProfileName <AtrbtTypeId(1-255)>]
[alrmAaaSwitchoverRetryFailThrshld(1-250)>]>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[accessreq-ret
ries
<retransmissio
ns>]
Denotes the maximum
number of times the AAA
client can resend the access
request.
Optional 3 0-5
[accessreq-int
erval
<timeout>]
Denotes the interval, in
seconds, after which the AAA
client can resend the access
request.
Optional 500 10-100000
[nasid
<nas-identifie
r>]
Denotes the unique identifier
of the ASNGW NAS. Sent in
Access Request message
only if configured. Should be
in FQDN format.
Optional null String (up to 64
characters)
[timezone-offs
et
<time-offset(0
-86400)>]
Denotes the time zone offset,
in seconds, from GMT at the
NAS.
Optional 0 0-86400