User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 212 System Manual
3.3.11.6 Managing the Authenticator Function
The Authenticator function of the NPU manages MS authentication for accessing
WiMAX network resources. It also maintains context information for each MS that
has accessed or is trying to access the network. For this, it handles all key
derivations and distribution. In addition, it uses AAA client functions to send
RADIUS messages on the R3 interface.
Authenticator function parameters can be configured only by the vendor.
To display configuration information for the Authenticator function, run the
following command:
npu# show authenticator
Command
Modes
Global command mode
Command
Syntax
npu# show authenticator
Privilege
Level
1