Manualshelf

User's Manual

ManualsBrandsAlvarion Technologies ManualsElectronicsBreezeMAX 4Motion Broadband Wireless Access System
51525354555657585960
Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 211 System Manual
3.3.11.3 Managing the MIP-Foreign Agent Functionality
3.3.11.4 Managing the Proxy-MIP Client Functionality
3.3.11.5 Managing the ASN Interface
The ASN interface is the NPU interface that is exposed towards the BS or another
ASN gateway.
For the current release, the bearer interface IP address is used as the value of the
ip-intf parameter.
ASN Interface parameters can be configured only by the vendor.
To display the parameters of the IP interface (R4/R6) of the ASN interface, run the
following command:
npu# show asnif
IMPORTANT
The MIP-Foreign Agent functionality is not supported in the current release.
The command npu# show mip-fa is not applicable.
IMPORTANT
The Proxy-MIP client functionality is not supported in the current release.
The command npu# show mip-client is not applicable.
Command
Syntax
npu# show asnif
Privilege
Level
1
Display
Format
% Asn-gateway ASNIF config
Alias bearer
ASNIF IPAddr <value>
ASNIF Mtu <value>