User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 210 System Manual
3.3.11.2 Managing the IGMP Functionality
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[<nw-id>] Denotes the network ID (s) for
which you want to view the
next-hop IP addresses
already mapped to it.
Specify a value for this
parameter if you want to view
the next-hop IP address(es)
defined for a specific network
ID. If you do not specify any
value for this parameter, all
the existing entries for
mappings of network IDs-
next-hop IP addresses are
displayed.
Optional N/A 6-byte ID
Display
Format
nw-id next-hop-ip address
<Network ID 1> <Ip Address>
<Network ID 2> <Ip Address>
Command
Modes
Global command mode
IMPORTANT
The IGMP functionality is not supported in the current release.
The following commands are not applicable:
npu# show igmp
npu# show igmp-membership