User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 358 System Manual
3.3.13 Configuring Performance Data Collection
You can configure 4Motion to periodically collect and store performance counters
with respect to the following groups:
Command
Syntax
npu(config)# no log level
[{StartupMgr
|SWDownload|FaultMgr|PerfMgr|ShelfMgr|SIGASN|UserIF|AUMgr}]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[{StartupMgr
|S
WDownload
|Faul
tMgr
|PerfMgr|
ShelfMgr|SIGAS
N
|UserIF|AUMg
r}]
Indicates the name of the
module for which logging is to
be disabled.
If you do not specify any
value for this parameter,
logging is disabled for all
parameters. For more
information about these
modules, refer
Table 3-24.
Optional N/A
 StartupMgr
 SWDownloa
d
 FaultMgr
 PerfMgr
 ShelfMgr
 SIGASN
 UserIF
 AUMgr
Command
Modes
Global configuration mode