User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 342 System Manual
npu# show keep-alive
3.3.12 Configuring Logging
Logs can be generated to record events that occur with respect to the following
system modules:
 System startup procedures: Refers to all procedures/events that occur during
system startup.
 NPU/AU upgrade procedures: Refers to all the procedures executed while
upgrading the NPU/AU.
 Fault management procedures: Refers to internal processes that are executed
for monitoring erroneous conditions or fault conditions.
 System performance procedures: Refers to internal processes that are
executed for monitoring system performance.
 Shelf management procedures: Refers to internal processes that are executed
for monitoring the health and temperature of all hardware components (other
than the NPU) such as the AU, PIU and PSU.
Command
Syntax
npu# show keep-alive
Privilege
Level
1
Display
Format
% Asn-gateway Keep Alive Configuration
asn-ka : <enable/disable>
period : <value>
rtx-cnt : <value>
rtx-time : <value>
Command
Modes
Global command mode