User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 338 System Manual
3.3.11.16.5 Displaying Configuration Information for PHS Rules
To display all or specific PHS rules, run the following command:
npu# show phs-rule [<rulename>]
Specify the rule name if you want to display configuration information for a
particular PHS rule. Do not specify a value for this parameter if you want to view
configuration information for all PHS rule.
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[<rulename>] Denotes the rule name of the
PHS rule that you want to
delete.
Specify a value for this
parameter if you want to
delete a specific PHS rule. Do
not specify a value for this
parameter, if you want to
delete all PHS rules.
Optional N/A String
Command
Modes
Global configuration mode
IMPORTANT
An error may occur if you provide an invalid value for the rulename parameter. Refer the syntax
description for more information about the appropriate values and format for configuring this
parameter.
Command
Syntax
npu# show phs-rule [<rulename>]]
Privilege
Level
1