User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 298 System Manual
npu(config-srvcprfl)# exit
3.3.11.15.3.5 Displaying Configuration Information for Service Profiles
To display all or specific service profiles, run the following command:
npu# show srvc-profile [<profile-name>]
Specify the profile name if you want to display configuration information for a
particular service profile. Do not specify a value for this parameter if you want to
view configuration information for all service profile.
Command
Syntax
npu(config-srvcprfl)# exit
Privilege
Level
10
Command
Modes
Service profile configuration mode
IMPORTANT
An error may occur if you provide an invalid service profile name. Refer the syntax description for
more information about the appropriate values and format for configuring this parameter.
Command
Syntax
npu# show srvc-profile [<profile-name>]
Privilege
Level
1