User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 170 System Manual
3.3.9.3 Displaying the IP Routing Table
To display the IP routing table, run the following command:
npu# show ip route
IMPORTANT
An error may occur if a route matching the specified parameters does not exist.
Command
Syntax
npu(config)# no ip route <ip_address> <ip_mask> <ip_nexthop>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<ip_address> Indicates the destination host
or network IP address, for
which the route is to be
deleted.
Mandatory N/A Valid IP
address
<ip_mask> Indicates the address mask
for the static route to be
deleted.
Mandatory N/A Valid address
mask
<ip_nexthop> Indicates the next hop IP
address, for the route to be
deleted.
Mandatory N/A Valid IP
address
Command
Modes
Global configuration mode
Command
Syntax
npu(config)# show ip route
Privilege
Level
1