User's Manual
Document History
4Motion ii System Manual
Document History
Topic Description Date Issued
Preliminary Release for Early Field
Trials
New System Manual January 2008
Preliminary Release for Beta May 2008
Release for GA July 2008
SDR
Section 1.3.1.3
Removed August 2008
Template Changed September 2008
Power Feeder
Section
1.3.4
Supported in release 2.5 December 2008
7 MHz Channel Bandwidth
Table 1-4, relevant sections in
Chapter 4.
Supported in release 2.5 December 2008
Installing 4x2 ODU
Section 2.1.4
Updated (including new installation options) December 2008
Installation recommendation
Section 2.3.9.1
Recommendation on installing AUs in a
3-sector configuration
December 2008
Trap Manager
Section 2.1.5
Modified instructions for initial configuration December 2008
Operation and Administration Using
the CLI
Chapter 4
Updated to reflect NPU SW Version 2_5_1_8 December 2008
Rate Limiting for the NPU
Section 3.3.7.2
Rate limits are configurable only by the
vendor.
May 2009
Configuring ACLs
Section 3.3.10
Updated default ACLs. May 2009
Configuring Performance Data
Collection
Section 3.3.13
Added support for new counters groups,
updated names.
May 2009
Configuring the Power Control
Required C/N Level Parameters
Section 3.8.6.2.2
Updated Defaults for cqi, cdma, qam64-1by2,
qam64-2by3, qam64-3by4, qam64-5by6.
May 2009
Managing the BS Keep-Alive
Functionality
Section 3.8.26
Updated commands’ syntax. May 2009
Managing the BS Idle Mode
Parameters
Section 3.8.28
New feature May 2009