User's Manual
Document History
4Motion xi System Manual
IP-IP Service Interface Parameters
Sections 3.3.11.12.2.1,
3.3.11.12.3.1
Updated syntax of commands for better
support of commands auto-completion.
May 2009
Displaying Configuration Information
for the Service Interface
Section 3.3.11.12.6
Updated May 2009
VLAN Service Interface Parameters
Sections
3.3.11.12.2.2,
3.3.11.12.3.2
Updated syntax of commands for better
support of commands auto-completion.
Updated possible values and description for
vlan-id.
Added mask for dflt-gw-ip.
May 2009
QinQ Service Interface Parameters
Section 3.3.11.12.2.3
Updated syntax of commands for better
support of commands auto-completion.
Updated possible values and description for
vlan-id.
May 2009
ASN-GW Keep-Alive Parameters
Section 3.3.11.17
Updated syntax of commands for better
support of commands auto-completion.
May 2009
Configuring Power Feeders
Section 3.3.15.3.1
Updated syntax of commands for better
support of commands auto-completion.
May 2009
RF Frequency
Section 3.8.14
Updated possible values. May 2009
General Neighbor BS Parameters
Section 3.8.13.2.1
Updated possible values. May 2009
Bearer Interface IP Address
Section 3.3.2.3.3
Addedd comment: After changing the bearer
IP address, save configuration and reboot to
apply changed IP address on ASN and CSN
interfaces.
May 2009
IP Connectivity Mode
Section 3.3.1.1
Added comment: You must save the
configuration for a change in connectivity
mode to take effect after next reset.
May 2009
Next Boot Mode
Section 3.3.4.1
Added comment: You must save the
configuration for a change in boot mode to
take effect after next reset.
May 2009
Restoring the Factory Default
Configuration With Connectivity
Section 3.3.5.4.7
New feature. May 2009
displaying Failures in Configuration
Restore Operations
Section 3.3.5.4.8
New feature. May 2009
Topic Description Date Issued