User's Manual

Chapter 2 - Commissioning Completing the Site Configuration Using AlvariSTAR
4Motion 63 System Manual
3 The new Service Profile added to the list of available Service Profiles in the
navigation tree. Select it to continue the configuration process.
4 Click Add in the Service Flow area.
5 Configure the applicable general parameters of the Service Flow.
6 Configure the applicable QoS parameters of Service Flow for UL and DL (for
Data deleivery type=BE it will be Maximum Sustained Traffic Rate and Traffic
Priority)
7 Associate this Service Flow with previously created Classification Rule(s).
8 Change the Profile Status to Enable
9 Click Apply for the device to accept the configuration.
2.2.6 BS Configuration
2.2.6.1 Creating a New BS Entity
1 Right click on the BS level entry in the Navigation Pane. The New BS definition
window will open.
2 In the New BS definition window, define the following:
» BS ID LSB
» Operator ID
3 Click Apply.
4 Complete the BS configuration as described in the following sections.
2.2.6.2 Radio
2.2.6.2.1 Basic Screen
2.2.6.2.1.1 General Tab
1 Configure the following mandatory parameters:
» Name
» Bandwidth
» Center Frequency
To create a new BS entity: