User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 204 System Manual
3.3.11 Configuring the ASN-GW Functionality
The ASN-GW functionality indicates that the NPU executes the following
functions:
Display
Format
(Extended)
Extended IP Access List <ACL Number>
-----------------------------
Access List Name(Alias) : <ACL Name>
Interface List : <Interface>, <Interface>
Status : <value>
Filter Protocol Type : <value>
Source IP address : <value>
Filter Source Port : <value>
Rule Action : <value>
QoS Classifier ID : <value>
Marking rule status : <value>
Command
Modes
Global command mode
IMPORTANT
Execute the procedures described in this section only if you are operating the NPU in the ASN-GW
mode. Skip this section if you are operating the NPU in the Transparent mode.