User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing Antennas
4Motion 446 System Manual
<(0 to 20 StepSize 0.1)>] [antenna-product-id {<a list of default and standard
antennas> } ]
NOTE
The no-of-ports parameter is not relevant since the number of ports is derived from the
antenna-type.
Command
Syntax
npu(config-antenna-1)# params [antenna-type <string (32)> ]
[no-of-ports <(1 to 8 StepSize 1)> ] [mechanical-downtilt <(-90 to
90 StepSize 0.1)> ] [electrical-downtil <(-90 to 90 StepSize 0.1)>
] [longitude <longitude> ] [latitude <latitude> ] [tower-height
<(0 to 500 StepSize 1)> ] [heading <(0 to 359 StepSize 1)> ]
[cable-loss <(0 to 20StepSize 0.1)> ] [antenna-product-id {<a list
of default and standard antennas>} ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[antenna-type <string
(32)> ]
Antenna type to be
populated manually for
inventory information only
Optional N/A String (up to 32
printable
characters)
[no-of-ports <(1 to 8
StepSize 1)> ]
The number of antenna
ports. Not relevant since
the number of ports is
derived from the
antenna-type.
Optional 1 1-8
[mechanical-downtilt
<(-90 to 90 StepSize
0.1)> ]
Downwards mechanical
tilt of the antenna (in
degrees) as opposed to
the electrical tilt already
integrated in the antenna
(and thus taken as
reference; instead of the
horizontal plane)
Optional 0 -90.0 to 90.0
in steps of 0.1
[electrical-downtil <(-90
to 90 StepSize 0.1)> ]
Downwards electrical tilt
of the antenna, in
degrees
Optional 0 -90.0 to 90.0
in steps of 0.1