User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing ODUs
4Motion 436 System Manual
In addition to the configurable parameters, the following status parameters are
also displayed:
3.6.2 Configuring ODU Ports
Up to four ODU Ports, numbered 1 to 4, can be created and configured for each
ODU. However, for a 1by1 ODU only port number 1 is meaningful.
1 Enable the ODU Port configuration mode for the selected ODU Port (refer to
Section 3.6.2.1)
Display
Format
(for each
existing
ODU object
if requested
for all
ODUs)
ODUNo. :<value>
ExternalCavityFilterExistence :<value> or (0) if object does not exist
RequiredODUType :<value> or (0) if object does not exist
InstalledODUType :<value> or (0) if ODU is not installed
SerialNumber :<value> or null if ODU is not installed
Command
Modes
Global command mode
Parameter Description Possible Values
InstalledODUType The installed ODU Type.
 A valid ODU type
 odunotDetected (97)
 odutypeUnknown (98)
 odunotAssociated to sector (0)
SerialNumber The ODU serial number <number>
To configure an ODU Port: